The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.
This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-compatibility, but adding the new fuctionality.
The kit cames with main controller board, IMU*2, cables and optional aluminum case. It can be upgraded to any new version firmware.
Capabilities of the controller
Possibility to manage the system on different platforms
Desktop systems: Windows, MacOS, Linux. Possibility to update the firmware of the controller.
Open Serial API
Open programming interface for building of external control modules - both for software and various electronic devices.
Automatic tuning of PID parameters
Automatic tuning of PID parameters will allow you to quickly prepare the system for work either at the initial settings or at changed conditions.
Support of systems with various configurations
Flexible customization of the sensor orientation.
Support for a wide range of engines of various configurations and sizes.
Support for two sensors
The system works with either one or two IMU sensors. The use of two sensors allows to obtain a more stable and accurate stabilization system.
Optimized control algorithm
The algorithm uses no more than 30% of CPU power and has a large reserve for future opportunities.
Operation of the system at any angle
The system operates at any inclination of the stabilizer frame, and has several modes of operation: Briefcase, Upside Down.
Different algorithms of follow mode
Flexible configuration of the follow mode for each axis. Automatic switching of horizon axis mode from lock to follow in case of camera tilt.
Adaptive PID-algorithm for preventing vibrations
Up to five user-configurable modes of system operation with a toggle button
Support of a wide range of external control protocols
Futaba, Spectrum, 5x PWM, Sum-PPM, 3 ADC.
Flexible configuration for use with any functions of the system.
The system can decode Futaba / Spectrum and provide PWM to control servo drives.
Battery voltage drop compensation
Battery voltage drop compensation ensures proper control of engines during the whole life of the battery.
Different versions of the controllers for different needs
The licensing system allowed our partners to launch different versions of controllers for a wide range of applications: from compact controllers for stabilizers of light cameras to powerful ones for the stabilization of heavy units.
Ongoing work to improve the system
BaseCam Electronics is working closely with the developers of end devices, to improve the stabilization algorithms and expand the capabilities of the system within a single version of the controller.
|Size of the board:||50×50 mm|
|Distance between the mounting holes:||45 mm|
|Diameter of the mounting holes:||3 mm|
|Power supply voltage:||8–25 V (3s-5s LiPo)|
|Maximum motor current:||1,5 A|
|5V output current to power external devices:||up to 1 A|
※Newest firmware and manual for Alexmos/Basecam gimbal controller [HERE]
• Boards can vary in color from batch to batch. We cannot guarantee which color you will receive.
• Hardware specifications and layout are subject to change without notice for improvement.
• Controller's PID settings need to be set manually.