Beholder 3-Axis Handheld DS1

Quick to setup, easy to use, and extremely affordable are the key features of the new Beholder DS1 Camera Stabilize. Whether you are a celebrity chaser, interviewer, short film maker, wedding photographer or just an amateur, you will be amazed at the professional results shot with Beholder DS1. It is a perfect choice.

TRD's years of experience in developing gimbals for handheld and aerial stabilizers are realized in the DS1’s design. DS1 adds improved payload of 3.8 pounds (1700 grams), room for a camera’s flip-out LCD, and micro USB port for wired remote control. The stabilizer has a 32-bit controller with dual IMU sensors. The 32 bits processor enables multi-mode control which is more effective and efficient for movie shooting.

DS1 arrives pre-programed and ready to use out of the box. You can put your camera in any position including upside down and create continuous shots via remote control. With an extendable rod Beholder DS1 can also create crane, slider, dolly and time lapse effects with ease. Just like MS1, the new DS1 is compact enough to share a backpack along with other gear such as a camera, lens, and other accessories. The stabilizer offers the camera movement of a shoulder rig, a slider, a jib, and a stabilizer in a convenient package.

The compact size of the stabilizer makes it possible to shoot in locations that normally don’t allow commercial/professional filming. Camera operators of all levels will find the Beholder DS1 Camera Stabilizer to be a rewarding and improved experience. Supported cameras are listed in below section, including Sony A7 Series, GH4, BMPCC and Canon 5D/7D. The stabilizer has a ¼ inch mount at the bottom of the handle, great for mounting DS1 to a monopod for a stunning jib shot. Another feature of the Beholder DS1 Stabilizer is the built in 5 way joystick offering complete control over pan/tilt and mode selection.

DS1 features adaptive algorithm for preventing vibrations and supports up to three user-configurable modes with a toggle button. It also supports battery voltage drop compensation which ensures proper control of the drive motors during the whole life of the battery.

Dimensions :
Stabilizer: 300 x 175 x 160 mm, 11.8 x 6.9 x 6.3 Inches
Package: 375 x 200 x100 mm, 14.8 x 7.9 x 3.9 Inches

Net weight (excluding camera): 1090 grams, 2.4 Pounds
Total package: 1790 grams, 3.9 Pounds

Supported Cameras:
Maximum Payload: 1700g
, 3.7 Pounds
• Sony A7 series
• GH4, GH7, series
• Canon 5D, 7D
• NEX series
• DMC series
• Canon 5D, 7D
• Nikon D810, D800

Battery: 3* 3.7v Li-ion 18650 2600mAh
Range of Motion: 90°-180°
Yaw: 355°
Pitch: 355°±180° (effective operating range)
Roll: 355°±60° (effective operating range)
Battery Life: 3~4 hours (depending on conditions, such as camera & lens weight, operating environments and settings)

• Pre-calibrated
• Compact Design, fits in a backpack
• Travel friendly
• 5 way joystick
• Fun and easy to use
• Tool free operation

• 3-Axis stabilization
• Battery 3.7 volts 18650, 2600mAh
• Tripod mount
• USB charging port
• Micro USB for wired remote control
• 32 bit controller
• Dual IMU sensors

• Beholder DS1 Camera Stabilizer
• Camera quick release plate
• Adapter Plate
• USB LED light
• Battery Set. Limited time only
• Battery holder
• Travel case

One year manufacturer’s warranty provided by TRD.

Specification subject to change without notice.

Comments are closed.